Anderson’s Bridge

Definition: The Anderson’s bridge gives the accurate measurement of self-inductance of the circuit. The bridge is the advanced form of Maxwell’s inductance capacitance bridge. In Anderson bridge, the unknown inductance is compared with the standard fixed capacitance which is connected between the two arms of the bridge.

Constructions of Anderson’s Bridge

The bridge has fours arms ab, bc, cd, and ad. The arm ab consists unknown inductance along with the resistance. And the other three arms consist the purely resistive arms connected in series with the circuit.

The static capacitor and the variable resistor are connected in series and placed in parallel with the cd arm. The voltage source is applied to the terminal a and c.

Phasor Diagram of Anderson’s Bridge

The phasor diagram of the Anderson bridge is shown in the figure below. The current I₁ and the E₃ are in phase and represented on the horizontal axis. When the bridge is in balance condition the voltage across the arm bc and ec are equal.

The current enters into the bridge is divided into the two parts I₁ and I₂. The I₁ is entered into the arm ab and causes the voltage drop I₁(R₁+R) which is in phase with the I₁. As the bridge is in the balanced condition, the same current is passed through the arms bc and ec.

The voltage drop E₄ is equal to the sum of the I_C/ωC and the I_C r. The current I₄ and the voltage E₄ are in the same phase and representing on the same line of the phasor diagram. The sum of the current I_C and I₄ will give rise to the current I₂ in the arm ad.

When the bridge is at balance condition the emf across the arm ab and the point a, d and e are equal. The phasor sum of the voltage across the arms ac and de will give rise the voltage drops across the arm ab.

The V₁ is also obtained by adding the I₁(R₁+r₁) with the voltage drop ωI₁L₁ in the arm AB. The phasor sum of the E₁ and E₃ or E₂ and E₄ will give the supply voltage.

Theory of Anderson Bridge

Let, L₁ – unknown inductance having a resistance R₁.
R₂, R₃, R₄ – known non-inductive resistance
C₄ – standard capacitor

At balance Condition, 

Now, 

The other balance condition equation is expressed as 

By substituting the value of I_c in the above equation we get,

and 

on equating the equation, we get

Equating the real and the imaginary part, we get

Advantages of Anderson Bridge

The following are the advantages of the Anderson’s Bridge.

1. The balance point is easily obtained on the Anderson bridge as compared to Maxwell’s inductance capacitance bridge.
2.  The bridge uses fixed capacitor because of which accurate reading is obtained.
3. The bridge measures the accurate capacitances in terms of inductances.

Disadvantages of Anderson Bridge

The main disadvantages of Anderson’s bridge are as follow.

1. The circuit has more arms which make it more complex as compared to Maxwell’s bridge. The equation of the bridge is also more complex.
2. The bridge has an additional junction which arises the difficulty in shielding the bridge.

Because of the above-mentioned disadvantages, Maxwell’s inductance capacitance bridge is used in the circuit.